Wuxi Sunye Precision Machinery Co.Ltd
Wuxi Sunye Precision Machinery Co.,Ltd.
Add to Cart
Touch Screen Non Woven Automatic Kn95 Mask Making Machine
1. Aluminum alloy frame, fast to set up and adjust
2. Compact design, less space investment
3. Fully automatic production, only one labor needed
4. High quality electrical components and pneumatic components
5. Individual PLC control, equipped with touch screen for control andstatus monito
6. Uninterrupted and double side welding, the most efficientprocessing way.
| Model Number: | ZPFM95 | Machine Size: | (9M*1.4M*2M)(L*B*H) |
| Condition: | New | Packing Weight: | / |
| Automatic Grade: | Automatic | Packing Volume: | / |
| Qualification rate | 98-99% | Equipment utilization rate | ≥98% |
| Power: | 11 KW | Product Size Error | ±1mm |
| Power | 380V±10% 50Hz | Place Of Origin: | China |
| Air supply | 0.6Mpa-0.8Mpa | Packing: | Wooden case |
| Output: | 30~45 Pcs/min | After Sales services: | Engineer available |
| Control Model: | New Model | Warranty: | One Year |
Working conditions
Installation site: indoor flat ground;
Ambient temperature: 5 ℃ ~ 35 ℃;
Relative humidity: ＜ 85% (no condensation)
Altitude: ＜ 2000m
The working environment shall be free of combustible and corrosive gases, and
the air cleanliness shall not be less than 300000;
Power supply voltage: 380V ± 10% 50Hz
Air source: 0.45mpa-0.65mpa
Introduction
Thank you for purchasing our products. Please read and understand the manual carefully before use, so that you can quickly master the correct use method. Improper use will cause abnormal operation, may cause failure or reduce product quality.
During the operation of the machine, it is forbidden to touch the sensing device and moving parts.
When it is necessary to check and repair the electrical control circuit, it must be handled by electrical professionals.
Without the authorization of the company, it is not allowed to transform the machine or install unauthorized equipment, tools or peripheral equipment to avoid danger.
If you are unable to solve the problem in accordance with the requirements of this manual, please consult our company or authorized dealer. It is forbidden to set up the battery without authorization.
Do not use the machine outside the specified environment and conditions.
Precautions
Do not start the machine until you know the correct operation and safety rules of the machine.
It is forbidden to use the machine for untrained or unauthorized personnel.
Before using the machine, you must read this manual carefully and understand all contents and instructions.
After making sure that the machine has been installed and all necessary debugging has been completed, you can operate the machine.
Before starting, make sure that there are no tools or equipment on all surfaces of the machine.
If the power supply is interrupted, you should not touch the inside of the machine or electrical appliance.
During the operation of the machine, the operator should not leave the working area of the machine.
Structural features