Wuxi Sunye Precision Machinery Co.Ltd
Wuxi Sunye Precision Machinery Co.,Ltd.
Add to Cart
Full Automatic Folding Earloop Mask Producing Machine
Multilayer material is used for automated production flat mask finished product of the machine, you can use 1 ~ 5 layer PP spun-bonded non-woven activated carbon and filtration material, the entire process from raw material into the expected nose line inserted, sealing side, the cutting finished product are a line automation operation, the planar masks production equipment stable performance, high output, low failure rate, easy to operate.Mask machine plus several sets of inner ear mask machine, outer ear mask machine, lacing mask machine or ear belt spot welding machine, can produce all kinds of masks such as inner ear mask, outer ear mask, lacing mask and so on.
Main use
This is a full-automatic folding mask machine for making kn95 mask. It is a machine for ultrasonic wire feeding / fabric welding / elastic band welding on the mask body.
| Parameters | |
| Type | ZPFM95 |
| Size | (9M*1.4M*2M)(L*B*H) |
| Production Capacity | 30~45 Pcs/min |
| Failure rate | 10 min≤8h |
| Power | 380V±10% 50Hz |
| Air supply | 0.6Mpa-0.8Mpa |
| Qualification rate |
98-99%
|
|
Ultrasonic Frequency
|
20KHz |
| Product Size Error | ±1mm |
| Core Components |
PLC, Motor
|
|
Equipment utilization rate
|
≥98%
|
| Weight | 1300Kg |
| Working conditions | |
| Ambient temperature | 5 ℃ ~ 35 ℃ |
| Altitude | ＜ 2000m |
| Relative humidity | ＜ 85% (no condensation) |
| Installation site | indoor flat ground |
Introduction
Thank you for purchasing our products. Please read and understand the manual carefully before use, so that you can quickly master the correct use method. Improper use will cause abnormal operation, may cause failure or reduce product quality.
During the operation of the machine, it is forbidden to touch the sensing device and moving parts.
When it is necessary to check and repair the electrical control circuit, it must be handled by electrical professionals.
Without the authorization of the company, it is not allowed to transform the machine or install unauthorized equipment, tools or peripheral equipment to avoid danger.
If you are unable to solve the problem in accordance with the requirements of this manual, please consult our company or authorized dealer. It is forbidden to set up the battery without authorization.
Do not use the machine outside the specified environment and conditions.
Precautions
Do not start the machine until you know the correct operation and safety rules of the machine.
It is forbidden to use the machine for untrained or unauthorized personnel.
Before using the machine, you must read this manual carefully and understand all contents and instructions.
After making sure that the machine has been installed and all necessary debugging has been completed, you can operate the machine.
Before starting, make sure that there are no tools or equipment on all surfaces of the machine.
If the power supply is interrupted, you should not touch the inside of the machine or electrical appliance.
During the operation of the machine, the operator should not leave the working area of the machine.
Structural features