Computer program control, high output, good stability and low failure rate.
photoelectric detection of raw materials to avoid errors and reduce waste.
It can produce one to four layers of mask body.
The machine has the function of total count and batch count. The number of batch count can be set arbitrarily.
Replacing the mold can produce masks of different sizes and styles.
the whole machine adopts aluminum alloy structure, beautiful and sturdy.

Model Number:	ZPFM95	Machine Size:	(9M1.4M2M)(LBH)
Condition:	New	Packing Weight:	/
Automatic Grade:	Automatic	Packing Volume:	/
Qualification rate	98-99%	Equipment utilization rate	≥98%
Power:	11 KW	Product Size Error	±1mm
Power	380V±10% 50Hz	Place Of Origin:	China
Air supply	0.6Mpa-0.8Mpa	Packing:	Wooden case
Output:	30~45 Pcs/min	After Sales services:	Engineer available
Control Model:	New Model	Warranty:	One Year

Working conditions
Ambient temperature	5 ℃ ~ 35 ℃
Altitude	＜ 2000m
Relative humidity	＜ 85% (no condensation)
Installation site	indoor flat ground
Air source	0.45mpa-0.65mpa

Structure introduction: The mechanical part is divided into nine structures: cloth unwinding device, nose line installation device, fuse device, ear belt feeding device, mask folding device, finished product welding device, finished product cutting device and discharging device.

Cloth unwinding device: The cloth is pulled forward along with the material pulling wheel to lift the swing rod, and a displacement sensor is installed behind the swing rod. When the swing rod is lifted to rotate the metal induction plate to leave, the sensor sends a signal, and the motor rotates to transport the cloth, and then the automatic control of tension feeding can be realized.

Nose line installation device: The power of the nose line comes from the feeding motor. The nose line is first corrected by the nose line correction wheel. The corrected nose line is sent to the cutting mold by the feeding motor for cutting, and then pushed into the nose line welding position through the rear motor for down pressing and fusion.
Fusing device: After the cloth enters the tooth mold, it is welded by ultrasonic.
Ear Loop feeding: The Ear Loop is rotated and clamped and wound on the rotating disk. With the rotation of the rotating disk, the Ear Loop tension belt should move upward. The Ear Loop induction switch senses that the induction ring leaves the induction point and starts the motor. The motor drives the Ear Loop puller to transport the ear belt.

Mask folding device: The cloth will fold in half after passing the slope
Finished welding device: After folding, the products are welded together by ultrasonic.
Finished product cutting device: The cutter rotates the cloth through the middle to make the product shape
Discharging: The rotating mechanism drives the belt to rotate so that the products flow out along the belt direction.

Features

1. High stability, low failure rate, beautiful appearance without rust.

2. Computer PLC programming control, servo drive, high degree of automation.

3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.

4. The automatic mask making machine is automatic from material feeding to mask collection.
5. High automation in ear-loop welding, edge wrapping, counting, and material discharging.

6. The ultrasonic technique does no harm to the characteristic of the material. Easy and safe operation.
7. Artistic and durable, aluminum alloy board, lean and practicality.
8. Faster, Rotary connection device of Independent innovation design.
9. More stable, upgraded machine, touch screen, Taiwan photoelectric detection, stable performance, and low failure rate.

FAQ

Q1: What is the guarantee of the machine?
A1: The guarantee period of our machine is 12 months after the machine is installed well in buyer's factory;

Q2: What package do you use for the machine?
A2: Painted the machine with anti-corrosion oil, and then covered with plastic film, and then packed into wooden case or fixed onto wooden pallet as per clients' requirements, or shall be loaded into container with film packing. After fixed all machines, we will use drying agent to keep container inside dry.

Q3: Do you have instruction manual to guide us if i buy the machine?
A3: Yes, we supply detailed user manual for your reference. PLS read it carefully for guide. If there is still problem which could not be solved, PLS contact us, we are ready to help you anytime.

Inquiry Cart 0

Touch Screen N95 Non Woven Face Mask Making Machine

Earloop Mask Producing Machine

N95 Mask Producing Machine

KN95 Mask Making Machine

Disposable Mask Making Machine

Foldable Mask Making Machine

Non Woven Mask Making Machine

Disposable Mouth Mask Making Machine

Antiviral Face Mask Making Machine

Pollution Face Mask Production Line

Ultrasonic Spot Welding Machine

Respirator Mask Making Machine

Particulate Mask Making Machine

Bearing Assembly Machine

Touch Screen N95 Non Woven Face Mask Making Machine